1. The fire output will remain regardless of the condition of the alarm outputs. Upon the detection of any subsequent fire conditions the alarms sounders will resound. 4.2.6 Mute Panel Buzzer During a fire or fault condition the fire control panel’s internal buzzer will sound, this may be muted.
2. Fire Alarm Control Manual eBook resources & eBook authors. Read & download eBooks for Free: anytime! Quickstart Fire Alarm Control Manual QS1 Technical Reference Manual 1.3 Fire alarm system limitations The purpose of an automatic fire alarm system is to provide early detection and warning of a Page 4/30.
3. OrganizationThis manual provides information on how to properly install, wire, and maintain the FACP and related components, and is organized as follows: Chapter 1 provides a detailed description of the fire alarm control panel and its operation. Chapter 2 provides instructions for installing the fire alarm control.
4. These Smoke Alarms have two separate locking features: one to lock the battery compartment, and the other to lock the Smoke Alarm to the mounting bracket. Page 4: Weekly Testing. NEVER use an open flame of any kind to test this unit. You might accidentally damage or set fire to the unit or to your home.

• Quick Star Fire Alarm Manual Switch
• Fire Alarm Troubleshooting Guide
• First Alert Fire Alarm Manual
• Quick Star Fire Alarm Manual Pull Station Weather Proof Killark
• Quick Star Fire Alarm Manual Call Point

Zeta Alarm Systems: Infinity 1-8 Zone Control Panel

Introduction

Source Exif Data : File Type: PDF File Type Extension: pdf MIME Type: application/pdf PDF Version: 1.6 Linearized: No Encryption: Standard V2.3 (128-bit) User Access: Extract XMP Toolkit: Adobe XMP Core 4.0-c321, Sun Oct 01 2006 17:14:39 Format: application/pdf Creator: Greg Title: Microsoft Word - STAR Radio Fire Alarm User Manual.doc Create Date: 2009:07:07 11:02:14.

The Infinity Control Panel has 1, 2, 4, 6 or 8 detection circuits (or zones). 1 & 4 zone panels have 2 sounder circuits, whilst 4, 6 & 8 zone panels have 4 in total.

The front cover and termination PCB should be removed before installation and stored in a safe place to avoid damage. Mount the Infinity control panel where the controls may be seen and operated without difficulty, where it is accessible for maintenance and at a suitable point of access for the fire services. Ensure that the panel will be clean, dry and free from vibration and temperature excess.

This equipment must be installed and maintained by a qualified & technically competent person and an understanding of Fire Systems installation & BS5839 is assumed. For more detailed instructions and further details please visit www.discountfiresupplies.co.uk.

Power

The 240V AC Mains supply wiring should be fire resistant, between 1mm² & 2.5mm², fed from a double-pole isolating & fused (3A) spur. This should be secure from unauthorized operation and marked “Fire Alarm: Do Not Switch Off”.

The mains supply must be exclusive to the fire panel and the cable should be routed away from the other cables as it enters the control panel adjacent to the mains terminal block
on the right hand side.

Depending on panel load and standby requirements, two 12 volt sealed lead acid batteries (max 3.4Ah) may be fitted in the housing. The batteries should be wired in series (24V) using the supplied link-wire. Take care not to short circuit the battery terminals.

System Wiring

All wiring must be installed to meet BS5839: Pt1: 2013, BS 7671 and other regional standards & legislation. This must be in 2-core 1.5mm2 screened fire resistant cable for each circuit. The cable screen must be terminated and connected to Earth at the control panel only, connected through at all other positions, and protected with PVC earth sleeving to avoid unwanted earth connections.

Detection Wiring Zone

A maximum of 32 devices (i.e. smoke/heat detectors & Manual Call Points) may be fitted to each circuit.

All devices must give an alarm resistance of 470R: old style devices which give a short circuit in alarm are not compatible or compliant.

The End of Line diode is provided in the Panel and must be connected across the terminals of the last device on each circuit to allow the cable monitoring and all detectors should be connected using a dioded base. The End of Line diode is polarity sensitive and must be connected with the silver stripe towards the positive core.

Sounder Circuit Wiring

The sounder circuits are rated at a maximum of 150mA per circuit and a minimum of two circuits must be installed to comply with BS5839. All sounders must be polarized or a fault will be indicated on the sounder circuit.

A 10K End Of Line resistor which is supplied with the panel, must be inserted in the last sounder for cable monitoring. The sounder circuits are protected against short circuits with an electronic fuse which will automatically reset when the short circuit is removed and the control panel is reset.

Auxiliary Interface Wiring

Fire Relay: The volt-free SPCO relay changes in any fire condition. Max 30DC 500mA.
Fault Relay: This volt-free SPCO relay is normally energised and in a fault condition the output relay turns off to ensure fail-safe operation. This output may be configured to operate as an additional Fire Relay if required. Max 30DC 500mA.

Connecting and Testing the System

1. Before connecting any circuit, power up the control panel with all of the EOLs fitted
   directly in their terminals. When the 240V AC mains supply and the standby battery are
   connected there should be no fault indication.
2. Check the detection zone and sounder circuit wiring for correct continuity and insulation
   before connecting to the control panel. Do not use a high voltage insulation tester after the
   devices are connected. Continuity resistance should be approximately 1.2 ohm per 100m
   of cable. Insulation resistance between cores and earth should be greater than 1M ohm.
3. Remove the EOLs from the panel one circuit at a time and verify that a fault is
   indicated. Transfer the EOLs to the last device on each circuit, connect the cables to the
   terminals in the control panel and ensure any faults indicated are cleared. Repeat for all
   detection and sounder circuits.
4. Test all detectors, manual call points, sounders, relays etc. for correct operation using
   the One Man Test mode.
5. Test one device in each zone in normal operating mode to ensure all sounders are
   operational, take sound level readings and log them.
6. Measure the current consumption during normal operation and during alarm by putting
   a suitable current meter in series with the batteries, before removing the 240V AC mains
   supply. From these readings verify that the battery capacity is suitable.
7. Train the End User / Responsible person in the use of the Fire Alarm System including
   how to operate the controls and how to carry out their weekly test. Ensure the system Log
   Book is completed and handed over, the zone locations list is filled in and the operation
   instructions are mounted beside the control panel.

Operating and Programming the Panel

• Level 1: General – Controls Enabled LED: off
  • The controls are locked to prevent unauthorised operation.
• Level 2: User (from Level 1 press 1245 OK) – Controls Enabled LED: on
  • Controls: you may start and stop the sounders, reset the system, silence buzzer and override any delays in operation.
  • Delays: Press OVERIDE SOUNDER DELAY to toggle sounder delay on/off.
  • Disable/enable: press & hold DISABLE for 3 seconds, press zone number or START SOUNDERSas required, press OK, press & hold DISABLE for 3 seconds to exit disable mode. Repeat to remove disablement.
  • Test: press & hold TEST for 3 seconds, select zone required, press OK, Zones in test
    will flash. Press & hold TEST for 3 seconds to exit test mode.
  • Change Code: retype the access code, press OK, type new code, press and hold i for 5 sec, await beep.
  • Exit: press OK OK OK.
• Level 3: Engineer (from level 2 press 1245 OK) – Controls Enabled LED: flash
  • Set Delay: hold Override Sounder Delay for 3 seconds, type minutes required (0- 8 or 81=9, 82=10), press OK, LED flashes in confirmation.
  • Exit: press OK OK OK.
  • DIL Switches:
    • Switch 1 ON = Compatibility mode to operate older detectors
    • Switch 2 ON = Zone 2 non-latching
    • Switch 3 ON = Sounder circuit 3 change to constant aux 24v power
    • Switch 4 ON = Sounder circuit 4 change to constant aux 24v power
    • Switch 5 ON = DO NOT USE: NETHERLANDS ONLY
    • Switch 6 ON = Fault relay change to fire relay
    • Switch 7 ON = Reserved for future use
    • Switch 8 ON = Last zone delay override (i.e. for MCP operation)
• Supply Faults: the SUPPLY FAULT LED gives one long flash followed by a number of short flashes to indicate a number of different fault types.
  • 1 flash: Mains fault or Caged PSU fault
  • 2 flashes: Battery missing
  • 3 flashes: Battery voltage low
  • 4 flashes: Battery high internal resistance
  • 5 flashes: Charger fault

There's a StarLink Cellular or Cell/IP Communicator for all panels today communicating in 4/2 & Contact ID. Whether you're safeguarding your RMR-producing accounts for the long term, upgrading from POTS or 3G/CDMA sunsets, doing takeovers in your area, or just starting a new installation off right, StarLink is there with Easiest Installation in minutes.

Unbeatable StarLink Pro Trade-up Incentive – Lowest Net Equipment Costs, as low as Free

They say imitation is the sincerest form of flattery – so we are very flattered by competitive manufacturers and their attempts to follow suit – Offering their tiny radio rebates or via contrived performance tiers, or hard-to-follow redemption methodology, often on super specific models, or just for replacing particular ones still active in the field. StarLink has long been the lowest cost, proven solution for Cellular Alarm Communications on any panel or FACP. And, rest assured, you can use our Professional Tradeup Incentive everyday,on every job, on every model. Whether you tradeup from POTS lines, Sunset 3G/CDMA radios, old radios, mesh radios, whatever the age or manufacturer brand – even tradeup New Installations to StarLink, and each time, you will save $100 off your standard equipment costs, in the form of a service credit on your account.Standardize on them: Simply follow 4-Steps on the online StarLink rebate form, you'll get a friendly confirmation email, and quickly, voila, your radio net equipment cost effectively goes down to ZERO or Free, or under $50 USD for those with more horsepower.

• For Full Tradeup Incentive Program Details Click Here

Flexibility to Choose Your Cell Network and Central Station

Keep your RMR flowing, StarLink LTE Models are available in choice of AT&T LTE or Verizon LTE Networks, and reporting to your choice of central station. You know your area best, choose the carrier with the best coverage (we also have a StarLink Signal Strength Tester Tool, too.) And, why be locked into a manufacturer's choice of central station and subjected to unavoidable mandatory price increases? Be as competitive as you'd like, shop around; they're your accounts, send alarm reports from StarLink Radios to any monitoring office you'd like (requiring no special equipment either).

Connect to More RMR with StarLink Connect Multi-Brand Downloads and Smart Bus Support (Honeywell/ADT, DSC, Gemini panels)

StarLink Connect Cellular/IP Communicators play well with others: New DL models for up/downloading using native software, e.g., Compass for Honeywell Vista^® Panels &/or DSC^® Panels using DLS software, or Napco Gemini's Quickloader. And Multifunction StarLink Connect Communicator / Hub Models, also provide top panel brands with smart SMS communications, e.g., text message alerts for your accounts, for things that happen or didn't happen. And because StarLink Connect supports smart bus activity on the Honeywell/ADT, DSC and Napco panels, activity can be pinpointed, events grouped and messaging can be smartly identified to accounts, as texts on their phones &/or controlled via the smart keypad app that exactly matches the one on their wall, be it a Vista^®, Safewatch^® or Power^® Series (+ Napco Gemini). Plus, your company can use that same smart virtual keypad app for true hand-programming, and do remote, contactless service calls, saving truck rolls.

Remote Customer Convenience & Contactless Customer Servicing

Hot New Remote RMR Service with Popular Panels, too. Not only does the StarLink Connect Cell/Hub provide panel support for popular brands (Honeywell/ADT, DSC, Napco Gemini), but our App provides you with a top-selling feature for accounts: Custom alerts and a keypad interface on any smartphone that mirrors the one on their wall, in looks, functions and commands. With this affordable service, customers can stay on top of whatever's going on in their homes, and stay in charge of their security system, wherever they go with their phone.

Save a truck roll, too and do Contactless Service Calls - Use that same keypad app from StarLink Connect — but do customer service calls and updates remotely on your smartphone or smart device – on the mirrored virtual keypad at the premises, check status, look at open zones or troubles, even do keypad programming (click here for support by model). Update users, settings and more, from your phone, or download the full panel program using your panel model's native software.

The Bucks Stop Here- Avoid Unnecessary Expenses & Equipment

StarLink Communicators are designed to be easy and quick to install in minutes. They are low current draw, so they eliminate the need for extra power supplies. StarLink Fire Communicators additionally eliminate using extra conduit for installation. Plus, StarLink Fire Dual Path Cell/IP Models are self-supervised, eliminating a supervision module, and they have 2 new onboard modular jacks for easiest FACP quick connection. All StarLink models have over the air software upgrades, so you'll always have the latest technology, without rolling a truck. We stand by our equipment longer too — StarLink Communicators have Napco's standard 3-Year Factory Warranty (including over-the-counter exchange) vs. the shorter period of many of our competitors. Speaking of which, unlike some of our competitors, who are no longer with us, or sell your products to Big Box Retailers or DIY online — we've been here, dedicated to the professional security channel alone, over 50 yrs. So no worries – we've got your back.

Why StarLink LTE Communicators are proven to work better – even where others won't

Even in difficult LTE coverage areas, StarLinks work better because they use twin dual diversity antennae –both separated & independently spaced. Each antenna receives signals simultaneously, then, using Signal Boost^™, StarLink signals are intelligently selected and combined, to maximize the signal & eliminate signal drop-outs. In contrast, single antenna competitors are more prone to multi-path effects, i.e., signal disturbances prevalent in large commercial settings, where signals can disturb or effectively cancel each other out—often unavoidable with a single stick antenna design. For still greater reliability and confidence, all StarLinks are preactivated to confirm proper communications, saving you onsite labor & time. Optional StarLink Omni-X Extended Antennas are also available for even extremely challenging locations, and for use on all Radio brands, coming complete with full mounting hardware (ground plate for Fire) & low-noise LMR-type cable of various lengths.

Code Compliant & AHJ-Friendly

StarLink Models meet or exceed the compliance codes for each of their applications, i.e., commercial fire, intrusion or connected services, so your jobs will too. Our many models, in ABS or Metal Enclosures, to meet local /regional AHJ codes, meet applicable UL and/or NFPA Codes. And we keep a dynamic document with downloadable compliance certificates by model online, all-in-one place for you, so you can pull one down and have it handy whenever the need arises. Plus, we have different Signal Plans, as required by different codes. And, avoid those unplanned monthly surcharges, too. That's not who we are – StarLink offers unlimited signal plans as Standard.

Replace POTS land lines with cellular alarm reporting quickly and easily with code-compliant, panel-powered StarLink Fire Communicators. Don't wait for copper lines to disappear in storm damage or be retired by the phone company - risking lives and liability in an emergency. Migrate or takeover lucrative fire alarm accounts, including millions of 12V and 24V FACPs, communicating via Contact ID or 4/2. Low-current usage, enables StarLink Fire to be panel powered, eliminating the need for extra power supplies, extra conduit run & transformer. Generate new Fire RMR, providing accounts with cellular alarm reporting, while saving them $1000's of budget dollars per year vs. dedicated POTS − Each Starlink Fire Cell Communicator replaces 2 leased landlines per FACP. Own and control the whole path, earn more now, as both the provider of alarm monitoring and the communications service.

Free Marketing Mailers / Statement Stuffers Help Your Company Tradeup Accounts or Takeovers to StarLink Cellular

(customizable with your contact info.). Just Ask Customer Service 1.800.645.9445

Features:

• Works on any panel - Universal full event sole & dual path cellular &/or IP alarm reporting from any panel brand, virtually anywhere
• Upgrade Accounts' Alarm Reporting to latest LTE networks, either AT&T or Verizon, for maximum cellular longevity and reliability nationwide, with unique dual diversity twin antennae design and Signal Boost^™ circuitry
• Easiest, fastest installation in under 10-minutes. Easy activation with auto-dialer capture; Panel-Powered Technology^™ (powered by the panel)
• Still 'Free for All^™' applications, with professional trade-up, from old radios, old networks, POTS or even on new construction (see details)
• Dependable, full data reporting to any Central Station nationwide, field-proven reliable, over 5-Million Times/Day (5,000,000+ StarLink alarm and supervisory signals are sent through the UL Napco Network Operations Center every 24 hours)
• Communicate alarm reports on LTE (Long Term Evolution) for 10+ year cellular life, Connected on Verizon's CAT1 extensively-deployed, cyber-protected multi-billion dollar network
• Remote On/Off Consumer App
• Over-the-Air (OTA) Upgradeable Communicator
• Full high-speed control panel upload/download supported on Gemini^™ (Requires cable; #SLE-DLCBL)
• NOTE- For up/downloading on other brands (ADT/Honeywell/DSC) please see StarLink Connect models,below.)
• Free Customizable Consumer Tradeup Trifolds/Statement Stuffers
• COMPLIANCES: UL1610, UL985, UL1023, UL1635
• What's Next in the Cellular Evolution & How to Leverage it for New Business
  

• Download new StarLink LTE Reference Chart - A761A

ORDERING INFORMATION, SOLE OR DUAL PATH INTRUSION MODELS:

• SLE-LTEV Sole Path Burglary Communicator (Black), Cellular &/or IP, Connected by Verizon LTE^™
• SLE-LTEV-CB Mercantile Commercial Burglary Model (Metal), Connected Verizon LTE^™, powered directly from control panel
• SLE-LTEV-CB-TF Mercantile model as above, but with plug-in AC Transformer, Connected by Verizon LTE^™
• SLE-LTEA Also available on AT&T LTE, Sole Path Burglary Communicator
• SLE-ANTEXT75 Optional extended antenna with 75' (also available w/ 50' or 30' cables)
• Download SLE-ANTEX Antenna Spec Sheet
• Free Assorted Resi & Comm'l Trifold Enduser Brochures/Statement Stuffers Designed to help trade-up accounts from landlines or old cell networks.

Napco StarLink Connect LTE Universal
Cell/IPCommunicator/ Smart Hub

• Easy-to-Install Cell-based Connected Home/Business – Requires No Internet Connection at Premises
• Upgrade/Takeover Virtually Any Existing Alarm System – Provide the Very Latest Features & the Smartphone Remote Interactive Control Today’s Consumers Want (growing list of major brands, i.e., Honeywell^®, DSC^®, Napco)
• Upgrade Accounts' Alarm Reporting to latest LTE networks, either AT&T or Verizon, for maximum cellular longevity and reliability nationwide, with unique dual diversity twin antennae design and Signal Boost^™ circuitry
• Generous Trade-up Incentive available when you upgrade from old radios, networks, POTS, landlines or new installs (see full details)
• Use with Your Choice of Favorite Panel Brand(s) & Any Central Station
• Easy Installation in Minutes & Real Equipment Cost Savings – 5-in-1 Functions from One Unit
• Full Remote Up/Downloads with Top Brands' Original Panel Program
• Smart Remote Virtual Keypad & SMS/MMS Text & Live Video Notifications using any/all keypad-bus activities & events - Powered by iBridge^® (App on iTunes^® & Google Play^®)
• 'Z-Hub Option' Models also include Built-in Z-Wave Device Control Hub for Connected Home/Business and Scenes
• Free! Customizable Consumer Tradeup Trifold Brochures/ Statement Stuffers, for assorted home or business account types

Universal Dual Cell/IP LTE Communicators with Competitive Panel Up/Downloading

New! StarLink Connect DL Models include Cellular/IP Communicator and Up/Downloading using native software, e.g., Compass for Honeywell Vista^® Panels &/or DSC^™ Panels using DLS software. Easy, lowest-cost LTE Cell upgrades and account protection from POTS and sunsetting networks, without learning new downloader software or changing remote panel maintenance methods.

• Universal Dual Path LTE Cellular /IP Alarm Reporting on AT&T or Verizon LTE (WiFi option)
• Use with Any Vista® Panel & Compass Downloader (&/or DSC Panels using DLS software) communicating via Contact ID or 4/2
• 15-min install; StarLink Panel-Powered Technology^™ -No extra power supplies or parts
• Choice of any Central Station
• Dual Diversity antenna & Signal Boost for superior performance in fringe areas
• Preactivated - Know it works before you're onsite
• StarLink-Tradeup-Incentive Eligible - Tradeup accounts from POTS, old radios, sunsetting networks &/or new installs.
• Models SLE-LTEA-CDL (ATT); SLE-LTEV-CDL (Verizon)

SLE-LTEV-C Universal Cell/IP Communicator & Remote Services Hub, Connected by Verizon LTE, for cell & IP alarm reporting, Full emulated remote keypad, bus data & full notifications. (Verizon, UL Listed model)

SLE-LTEA-C Cell/IP Hub, as above, but on AT&T LTE Network.

SLE-LTEA-CDL Dual Function Cell/IP & Download, AT&T LTE Network, for Honeywell DSC, Napco panels.

SLE-LTEV-CDL as above, Verizon LTE

SLE-LTEV-Z Universal Cell/IP Communicator & Hub, as above, plus Z-Wave Device Control built-in, on Verizon LTE Network. (Verizon, UL Listed model)

SLE-LTEA-Z Same as above, plus built-in Z-Wave control on AT&T LTE Network.

SLE-LTEV-CBTF-C Mercantile model, in metal locking enclosure with plug in AC transformer, Connected by Verizon LTE (for electrical specs see WI2315BLF.) (Verizon, UL Listed model)

SLE-LTEA-CBTF-C Mercantile model, as above, on AT&T LTE Network.

IBRIDGE APP w/ MESSENGER App for Smartphones/devices available on iTunes^® or Google Play^® for Connected Home Control features and iBridge Messenger^™ SMS/MMS Notifications

Free customizable tri-fold brochures for Connected Home (A712) and Assorted Smart Business (A736, A740, A741);A719B Smart Business StarLink Connect Handout

OPTIONAL ACCESSORIES:

SLE-WIFI-MODULE - Optional plug-in module for connection to the Internet† via a wireless (Wi-Fi) link, eliminating a wired Ethernet cable (for use w/ any StarLink Model)

IBR-TOUCH-WL Optional Touchscreen, 1024 x 600 7' hi-res color for security and optional automation or video control (using StarLink Connect or IBR-ZREMOTE), wireless connectivity, powered by 12VDC adapter, supplied. Also available in hardwire vsn IBR-TOUCH

• Download SLE-ANTEX Antenna Spec Sheet

Commercial Fire Alarm Communicators: Sole & Dual Path Cellular &/or IP

• Universal full event sole path cellular & dual path cellular &/or IP commercial fire alarm reporting from any panel brand, virtually anywhere
• For use as primary or backup communications on all 12V-24V control panels and FACPs that communicate using Contact ID and 4/2 (such as on legacy panels)
• Reports to any Central Station nationwide, via dial up or IP
• Choice of Verizon or AT&T LTE: Communicate critical life and safety alarm reports on cyber-protected multibillion-dollar cellular nationwide networks, for maximum security & liability protection on LTE (long term evolution) for longest cellular lifespan available.
• Unique StarLink LTE dual diversity precision twin antennae design & Signal Boost^™ circuitry ensure greater range & reliability, maximizing signal acquisition and null-avoidance, receiving signals simultaneously on both antennae
• Easy, flexible installation, activation & online account management
• Cost-saving models and plans for any code requirement. Substantial savings over monthly dedicated landline charges.
• Choice of plans (varies by model) – check-ins from 200 seconds, to 5-minutes to 1 hour, Verizon or AT&T^®
• Patented Signal Boost™ signal amplification circuit and high-gain performance antenna for longer range and reliability nationwide
• Expanded Upgrade Program - incentive for system upgrades from old radios (all makes) and old POTS landlines, as well as new (see full details)
• NFPA^® and UL^® Code-Compliant Standard ABS or Mercantile Models in Locking Metal Enclosure
• CODE COMPLIANT: UL864, 10th Edition, NFPA 72^® Editions 2016, 2013, 2010, 2007. UL1610, UL985, UL1023; CSFM; NYCFD; LAFD

SLE-LTEA-FIRE Sole Path Communicator, Cellular, AT&T LTE^™, ABS. Low current draw, panel-powered technology^™ (powered by control panel)

SLE-LTEV-FIRE Sole Path Communicator, Cellular, connected by Verizon LTE^™, ABS. Low current draw, panel-powered technology^™

SLE-LTEAI-FIRE Dual Path Communicator, Cell/IP, AT&T LTE^™, ABS. Low current draw, panel-powered technology^™ (saves extra power supply and conduit); plus quick connect telco jacks, 3 EOLR zone inputs and 2 Form C Really outputs (saves extra supervision module)

SLE-LTEVI-FIRE Dual Path Communicator, as above, but connected by Verizon LTE^™

SLE-LTEA-CFB Metal Version of SLE-LTEAI-FIRE, Sole Path Cellular, red locking metal enclosure on AT&T LTE Network, powered directly from control panel

SLE-LTEV-CFB Metal Version of SLE-LTEVI-FIRE, Sole Path Cellular, red locking metal enclosure on Verizon LTE Network, powered directly from control panel

Quick Star Fire Alarm Manual Switch

SLE-LTEAI-CFB Metal Version of SLE-LTEAI-FIRE, Dual Path Cell/IP, red locking metal enclosure on AT&T LTE Network, powered directly from control panel

SLE-LTEVI-CFB Metal Version of SLE-LTEVI-FIRE, Dual Path Cell/IP, red locking metal enclosure on Verizon LTE Network, powered directly from control panel

SLE-LTEA-CFB-PS Sole Path metal model in red metal housing with power supply for Direct 120VAC, and plug-in transformer option, on AT&T LTE Network (Provisions for backup battery/charger. Or, Optional TRF12 plug-in transformer may be used, where codes permit.)

Fire Alarm Troubleshooting Guide

SLE-LTEAI-CFB-PS Dual Path metal model, as above.

First Alert Fire Alarm Manual

SLE-LTEV-CFB-PS Sole Path metal model in red metal housing with power supply for Direct 120VAC, and plug-in transformer option, on Verizon LTE Network (Provisions for backup battery/charger. Or, Optional TRF12 plug-in transformer may be used, where codes permit.)

SLE-DLEXT: Optional, as above, for downloading, extends distance to Napco panel up to 100’

TRF12: Optional Plug in AC Transformer, 16.5V / 20VA (use is subject to local code compliance)

Quick Star Fire Alarm Manual Pull Station Weather Proof Killark

SLE-DLCBL: Optional High-Speed Napco Panel Up/download cable

Quick Star Fire Alarm Manual Call Point